Regular curtains will not evenly hang in a traverse rod. But with a few sewing and pinch-pleating, you can turn regular curtains into pinch pleat curtains.
How do traverse curtain rods work?
Traverse rods have clips or eyes that move along a track embedded in a slot in the rod. The eyes have a small opening for the curtain pins and they’ll run evenly across the rod, with the number of eyes dependent on how long the rod is. A cord runs through the rod, too, and is attached to a master slide or pulley.
Are traverse rods out of style?
Are Traverse Rods Out Of Style? Traverse curtains can be difficult to find in stores, but that’s because of demand, not lack of style. This style of curtain has a timeless and sophisticated look that never really goes out of style. However, they are more expensive.
Can I hang rod pocket curtains on a traverse rod?
Although the traverse rod system was made for pinch pleat curtains, you can adapt almost any rod pocket curtain to work on the rods.
How do you hang non pleated drapes on a traverse rod?
Step 1: Look for Heading Tape. Step 2: Measure the Space. Step 3: Mark for Pin Placement. Step 4: Stitch Pin Pockets. Step 5: Add the Drapery Pins. Step 6: Hang the Drapes.
What’s the difference between a curtain rod and a drapery rod?
Drapery rods and curtain rods are both used to hold up fabric. That is the main idea of the rods. Both are supported with hooks. The hooks for drapery rods are thicker to support the weight while the curtain rods are supported with slightly less.
Can you use back tab curtains with a traverse rod?
If you want to use a traverse rod, that opens and closes with the pull of a cord, you need to alter your tab-back panels to accept a drapery pin. Just by making a small single-finger pleat, the curtains can accept a pin and hold the folds in place as the curtains are opened and closed on a traverse rod.
What is a center draw traverse rod?
When draperies draw from the middle to the right and left of the Traverse Curtain Rod, it is called Split Draw (or Center Draw).
How are Traverse curtains measured?
Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.
Who makes traverse curtain rods?
Kirsch Decorative Traverse Curtain Rods are as functional as they are beautiful. Kirsch offers the Estate Traverse Rod Collection in Wood and Metal, in both 1 3/8 inch and 2 inch options.
Can you hang rod pocket curtains with hooks?
Pinhooks can give you the custom-pleated look you want without the wear and tear on your wallet that nobody wants. The best news is that with a little ingenuity, pinhooks can be used with rod pocket curtains and a curtain rod, sparing you the expense of the more traditionally-used traverse rod.
What is Pleater tape?
Best Pleat Pleater Tape is 4 inches wide and used in drapery headings to make creating pleats easy. Use with traverse pleater hooks to make triple pinch pleated curtains. Sew the tape to the back of the heading and side the ends of the hooks into the pockets on the tape to make perfect pleats.
