Most closet rods are 1 1/4 inches wide. This standard diameter gives the rod stability and prevents bending under heavy loads. A wood rod of this diameter is typically supported by a bracket every 34 inches.
What is the standard depth of closet shelves?
Closet shelves come in standard depths of 12″, 14″, or 16″. You can go deeper with a custom depth shelf for linen or storage closets not intended for clothing depending on what you plan to put on them and whether you want to include closet accessories.
How deep is a shelf above a closet rod?
Unless your closet uses tall doors or doors that go all the way to the ceiling, a 12 inch shelf depth is recommended. The reason is because of the space between the header and the top shelf in the closet. In standard construction, the bottom of a header is typically positioned at 72 inches from the floor.
Can a closet be 20 inches deep?
The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Shelf depths of 12” (30.5 cm) should be used for shoes and smaller clothing elements.
How far from the wall should a closet rod be?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
How deep should built ins be?
Depth is generally 24″ including the faceframe and back. If I’m building a cabinet with butt joints, a face frame and a back attached directly onto the back of the cabinet (not set into dados), I cut my sides and shelves at 23″ deep.
What is the minimum depth of a wardrobe?
The minimum depth needed is 650 mm (25 1/2 inches). The standard depth of a wardrobe with hinged doors needs to be 500 mm but with a sliding wardrobe, you have to cater for the top track which is approximately 80 mm.
How long can a closet rod be?
Closet Rod is available in custom lengths up to 96 inches. A center support is required for beams longer than 48 inches. Additional supports are recommended if the closet rod will be supporting especially heavy apparel (i.e. winter coats, heavy weight suits, etc.). Beside above, what is the rod in a closet called?
