Strip & Wax Floor Prices
HomeWyse states that average cost to strip and wax a floor is about $174. The lowest cost you could expect to pay is about $148 while the highest cost is about $200. This cost estimate is based on a 314 sq ft room. This makes the average cost of stripping and waxing a floor at $1.80 per sq ft.
How long does it take to strip a wax floor?
Overall, when using a chemical stripping agent, the stripping process takes about fifteen minutes to sit before applying agitation to the floors. After the wax has been applied, it will cure overnight and can be used the next day.
Do you have to strip a floor before waxing?
Technically, you do not have to strip the floor before you wax it. However, if you believe that there are too many coats of wax on the floor, causing the floor to become dull, then it’s best to first strip the floor before applying a new coat.
How often should floors be stripped and waxed?
We typically recommend that floors are professionally stripped and re-waxed every five to six months. Keeping them up to snuff is important, but don’t do it too often, as your floors are just going to be exposed to more traffic, more dirt, and more damage in that short period of time.
How do you calculate floor stripping?
Example – Strip and Wax 10,000sf VCT
Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot.Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350)Cost of pads, mops, etc. (
Does waxing a floor make it slippery?
Hardwood floors are not naturally slippery, but can become slick after applying a coating of wax or polish, or especially if the floor’s surface is dirty. The best ways to reduce the risk of slipping on your hardwood floor is to keep it clean and dry.
Can you wax over old wax on floors?
The old layer of wax has dirt and grime stuck in it, and when you put a new layer of wax over the old one, you’re encasing the dirt and grime, causing discoloration to show on the surface. Additionally, the larger molecules of wax simply stick to the surface (instead of chemically bonding).
Do people wax floors anymore?
Although paste floor wax is still available, today’s homeowners have a lot more options for giving their floors a shine. And lots of modern flooring actually shouldn’t be waxed.
Should you wax tile floors?
To wax ceramic tiles is an essential floor maintenance practice that makes the floor shiny and more attractive. Moreover, waxing makes the ceramic tiles waterproof, stain-resistant and creates a non-slip surface.
How do you Rewax floors?
Put a white pad on a floor buffer. Buff the wax into the floor. As you buff, keep the passes all going the same direction. Once you buff the entire floor, go over it again, but this time buff at a right angle to the first time.
How often should floors be buffed?
A once a month schedule is ideal, especially if the building always has a lot of people coming and going every day. For low-traffic areas, you can buff the floors about once every 2 months. Aside from aesthetic purposes, buffing your floors can also make them last longer.
How many square feet will 5 gallons of wax cover?
This 5-gallon container covers approximately 10,000 square feet (2,000 square feet per gallon). A 1-gallon container is also available from 1877FloorGuy for your convenience.
How long does it take to strip and wax 1000 square feet?
Wax 1000 sq.
Rectangular Machine (48” plt) 3.5 min. Buff with steel wool 20 min. Strip and rewax (1 man) 150 min. Dry strip and rewax (1 man) 120 min.
How long does it take for a waxed floor to dry?
It is a good idea to allow as much time as possible for all the coats to cure and adhere before allowing foot traffic across the floor. Typically 8 hours of curing is adequate before opening it up to the public. 72 hours is the recommended time for fresh finish to cure prior to burnishing.
