What are Bargeboards? A Bargeboard are also known as verge boards. They are the board that is fastened to the projecting gables of a roof. These provide strength to the roof and protect the otherwise exposed ends of timbers which are attached to the roof.
What is difference between Bargeboard and fascia board?
Barge boards and fascia boards are very nearly the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Barge boards run diagonally and are located at the gable end of a property.
Where is the Bargeboard on a house?
Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
Is a Bargeboard structural?
Bargeboards are attached directly to structural building support rather than being held up by trim boards as fascias would be. Bargeboards often create an overhang for protection or decoration purposes along the roof edge, gables or other roofline projections.
What timber is use for barge boards?
The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable. Utile or Iroko fascia, barge and soffit boards are also very good options.
What is barge board used for?
Bargeboard (probably from Medieval Latin bargus, or barcus, a scaffold, and not from the now obsolete synonym “vergeboard”) or rake fascia is a board fastened to each projecting gable of a roof to give it strength and protection, and to conceal the otherwise exposed end grain of the horizontal timbers or purlins of the
What size is a barge board?
Typically, you will find a 5.5 inch by 3/4 inch barge board which is commonly known as a one by six. The 1×8 or 1×10 may also be used depending on the type of construction. You may see a 2×4 used in some of the lower quality construction.
What is a barge board on a shed?
Barge Boards
Used to finish off the roof apex of each shed.
What are roof barges?
Barge cappings are fitted to waterproof the junction between the fascia or the barge board and the roof sheeting – providing an attractive finish to the roof.
What is a barge architecture?
bargeboard, also called vergeboard, exposed board or false rafter running underneath the slopes of a projecting gable roof.
What is the best material for fascia boards?
Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
What is the board behind the fascia called?
The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area. Alternatively, ventilation can be provided over the top of the fascia board.
How thick is a barge board?
Bargeboards are essentially the same as Fascia boards, most houses will use exactly the same boards for both areas. However, they can sometimes be more decorative than Fascias. These are supplied in 5 metre lengths. Unlike fascia boards which have a L shaped profile these boards are flat and approx 18mm thick.
Where do barge boards go?
Bargeboards are similar to fascia boards, except for the location, as fascias are always used at the lower part of the roofline, where the gutter is typically located. In contrast, bargeboards are located on an apex/gable. Fascias are rarely decorative whilst bargeboards occasionally are.
What is a barge board Australia?
A Bargeboard is a timber or metal member fixed along the pitched edges of a gable to cover the ends of the roof members. It is similar to a fascia board but is parallel to rafters, on an angle at the skillion end of a gable.
